If Ibanez made YOUR signature model...

[skins345669]

Mahogany Body - S series shape, but a little thicker - black stain finish
Cream binding
A bit more weight in the headstock than normal (to help sustain, á la fat finger)
Dark Rosewood Fretboard with offset dot inlays
3 Piece Wizard II profile maple neck with AANJ
ZR II Bridge
Pickups: Seymour Duncan Screamin' Demon (Neck)
Bareknuckle Miracle Man (Bridge)
Both with chrome covers
Odd pairing I know, but gives some nice scope sonically
Controls: One volume, two tone + killswitch (2 way)
5-way switch which goes:
1. Full neck
2. Neck inner coil
3. Two middle coils
4. Bridge inner coil
5. Full bridge
Hardwear in lovely shiny chrome
Comes set up for a standard set of 10s

[CaptainD00M]

Alder body UV Style
Oiled, maybe in a hoast of hidious 80's Prints/Graphics of like stars and the cosmos and some new agey stuff with a dark back ground.
Aum inlay below bridge in a sutable material (White on, ebony in wood)
Maple one peace neck, RG7620 profile/7620 Skunk stripe (they are a little thinner)
24 Frets Jumbo, last 6 frets scalloped.
Ebony fretboard with white binding.
Fret makers would be Chakra lotus styled representations, MOP on the oiled, hidious green, yellow and pink for graphics.
Lo-Pro Trem, deep rout for whammy stunts.
Black Pick Guard for oiled (read 7 string bad horise rip of hahaha) clear for 80's style.
5 Way jem styled switch, Vol Tone.
Evo7, Blaze Single and a Fred 7 in the neck (i know they exist, but only as custom orders only... i love the Fred) or Evo, Blaze, Blaze neck. White for oiled, green or yellow in cosmic colors. Or maybe green and yellow.

Id call it the Cosmos... Steve can have the Universe y needs are not so epic...
Be the worlds most New Age guitar baby.

Ed: With an RPP of $1000 USD. Else i wouldnt endorse it, and it would HAVE to be MIJ.

Peace
CD

[RG1820X]

I decided to change mine:


Specs
Color: GK Galaxy Black
Body: Basswood
Output Jack: Single Tilt

J-Custom 8620S Neck:
Neck: 5pcs. Maple/Walnut
Neck type: Super Wizard (w/ Titanium Reinforcement)
Fingerboard: Rosewood w/Flame Maple Binding
Position Inlay: Tree of Life ('06ver)
Fret: Custom Jumbo (SBB216-195)
Neck Joint: All Access
Scale: 648mm/25.5inch
Neck width: 43mm(Nut), 58mm(Last Fret)
Neck thickness: 17mm(1F), 19mm(12F)
Fingerboard Radius: 430mmR

Bridge: Double Edge Pro
Pickup(neck): White DiMarzio FRED (H)
Pickup(center): White DiMarzio Area '58 (S)
Pickup(bridge): White DiMarzio Tone Zone(H)
Hardware: Cosmo Black

Pickup Selector:


My new dream

[JPM7stringfan]

Color: Gloss Black w/Picasso design (P1 style)
Body: Alder
Output Jack: Single Tilt

Neck: 1pc Maple
Neck type: UV
Fingerboard: Rosewood
Position Inlay: DT band logos (Pearl)
Fret: Large (6140)
Neck Joint: Custom scoop, per my specs!

Bridge: Lo Pro Edge
Pickup(neck): Black DiMarzio Blaze II (H)
Pickup(center): Black DiMarzio Blaze II (S)
Pickup(bridge): Black DiMarzio Blaze II (H)
Hardware: Gold
Strings: Ernie Ball 7-string Power Slinky (58, 48, 38, 28, 18p, 14, 11)

[Tubyboulin]

Could have sworn i'd seen Vai using something that looked very similiar...Anyone know how mutch it would cost to have somebody actually build a guitar like this?

Neck - JEM Prestige neck
- Ebony Fretboard + Tree of Life
- Maple neck
Body - Basswood with Binding + Monkey Grip
Pickups - DiMarzio Evolution Set
Bridge - Ibanez EDGE gold
AANJ neck Joint

[6fingers]

[Brambram]

If Ibanez made MY signature model, it would be a RG565 styled Saber (like a 540S-SH).

Body: Saber style, or something like it (EDR?); Mahogany
Neck: 5-Piece Maple/Walnut Wizard Prestige-something; Bound Maple fingerboard; Reversed headstock; Off-set small dots on 12th fret.
Bridge: ZR2 trem Cosmo Black
Pickups: Neck: Single sized Air Norton; Bridge: Tone Zone
Controls: 1 Volume, 1 Tone (with coil tap), two on-off switches (540S-SH style)
Finish: OPP (Obnoxious Purple) with matching headstock and inlays, Cosmo Black hardware.

[Pulsar]

First one would be the shape of ESP's Alexi Laiho sig but with an unfinished, set-thru Wizard 2 Prestige neck (Yeah, I'm a dreamer). 2 SD distortions with 2 Vol, 1 Tone and a Lo Pro Edge in black, 2 thin blue pinstripes. Mahogany body, Ebony Fingerbaord, 500k Volumes and 1 meg tone with a push pull coil tap.

Second would be and RG body in mahogany with either The Fred/Paf Pro or SD Distortion/Pearly Gates and a middle pickup that won't get in my way. Same neck and contruction as before. Paint job would be something like the cover of Nightwish's Oceanborn Album. To be more specific, the background to my myspace. I may buy a body and have someone airbrush that on. Edge pro trem.

Both Trems would have stabilizers.

[SHREDaldente]

Mine would be similar to Chris Broderick's RG.
...Or it would be a Destroyer like this=
http://www.sonataarctica.info/pics/g...2007_jani2.jpg

[IBNZ_RG]

Basswood body
Maple neck/fretboard
Neck-Thru
Gotoh Tuners
Lo Pro Edge
Seymour Duncan Blackouts Metal p.u.
1 Vol. knob
Wizard prestige neck profile
Satin finish
Black neck binding

all that but a 7 string

[UV-7-BK]

Thats probably the closest i can make it look with the program(im shiet on a computer)
piezo for sure, sustainer and all that jazz!!!!

[Homebake]

i love the elegant looks of these. in terms of specs, TZ in bridge, PAF pro neck and original edge bridge.

i'm a sucker for those big JPM-style ibanez logos and binding.

[Laionel]

I've been really attract to some V shaped guitars lately, kind of strange when you think I was literally hating them as a youngster and that I'm not a metal fan by any means.
So I would most likely do something based on their VTB700 (why it was discontinued between, legal issue? poor sales?). I would go with some remake of most people 3 favorite models:
A tele like:
VBT shaped ash body a bit narrower (7/8 same length) but thicker, bolt on 24 frets wizard 2, Maple neck and fretboard, 25.5 scale, reverse head stock, good looking tuners, earvana nut, area T pick ups.
A Strat like:
The same but alder body, rosewood fretboard, same bridge as the AT300 model (some Wilkinson), area 61,67,58 as pick ups (versatile and noiseless set).
A gibson like:
the same characteristics but mahogany body, set in neck, locking TOM with strings through body, two humbuckers pickups say PAF 36th in bridge custom EJ in neck.

[g.milko]

goshhh great gear!!

[nickcoumbe]

6 string RG with contoured
24 fret maple neck with a birds eye maple fret board
Abalone markers of set small dots
Jem profile circa 1988
scalloped from 12-24 and medium fret wire
Edge/Lopro or whatever they are called these days
Graphtec nut (i.e. non locking) with Sperzel locking tuners
Alder body
Paf pro bridge and neck
1 volume control with built in tap function to select pickups. Neck on or bridge on and that's it. Skull nob