Super Wizard Prestige on a RGA121?

[sacredgeometry]

Hi I was wondering if anyone knows of anyone who has tried this, I am semi tempted as I swapped my rg550 for my rga121 recently...and it is a perfect guitar for me although the super wizard on my 550 was just slightly more comfortable so if the neck fits it might be something I am interested in doing.

Are the bodies for the say the rg3550 pre and post super wizard prestige necks identical? (and therefor theoretically the rga121)

[RGTFanatic]

unfortunately, no they're not the same. The width of the heel on the RGA121 is 58mm and you SW is 56mm wide. The 121 neck will bolt on, but you'll have to use something to shim the sides for a tighter fit.......... a business card would work well in this situation.

[sacredgeometry]

Originally Posted by RGTFanatic

unfortunately, no they're not the same. The width of the heel on the RGA121 is 58mm and you SW is 56mm wide. The 121 neck will bolt on, but you'll have to use something to shim the sides for a tighter fit.......... a business card would work well in this situation.

Not the original super wizards. (although that would have been ideal) The new prestige super wizards they have a 58mm heel too

[sacredgeometry]

ibanez.wikia.com/wiki/Super_Wizard_Prestige#Super_Wizard_Prestige

post 2009

[sacredgeometry]

bump?

[Swirltop]

Measure the width of the two necks at the heel; if they are the same they will swap out no problem...