Swapping Necks?

Metal2112 · #1 01-23-2006, 04:59 PM

I have an RG2120 and I was wondering if I can
swap the neck out for a Wizard profile neck.
Anybody know if that's possible?

Gresh · #2 02-01-2006, 11:54 AM

As long as they're both AANJ necks with 24 frets

Ozzdoc · #3 02-02-2006, 05:40 PM

I've been wondering the same, seems pretty universal, since there all the same length and if it's AANJ I see no reason not.

lyconxero · #4 02-02-2006, 05:45 PM

So then, does that mean that I could swap a Wizard II neck with a Wizard neck assuming that they're both 24 frets with AANJ?

bluealien · #5 02-02-2006, 06:12 PM

I have had issues with different AANJ necks being to tight to fit other guitars with out having to sand (or steel wool) some of the varnish off at the necks heal.

brothersnowgone · #6 02-02-2006, 06:16 PM

I say test them to see if they both fit right, the same as they did when they weren't swapped. If so (and they need to be the same type as said before me i.e. 24 frets, aanj) there should be no problem.