Bridge swap

[clar-v-d]

Hi, I've been offered an Edge bridge pretty cheap - around $40, I've measured up and it looks like its gonna fit the cavity on my js100. It comes with the mounting posts and inserts but no springs or claw. Will the springs and claw on my JS100 work fine or should I try to get edge springs etc?

Also are there any other parts that I need that I haven't mentioned.


Many thanks

[Kontalonis]

you may wanna recheck your math, the edge will not fit in an floyd rose/trs route. check it out: http://www.jemsite.com/axes/htm_features/trems.htm#ofr

[clar-v-d]

Yeh it says taht its very rare that they fit and luckily mine does.

[Societysucks]

you can probably get away with the swap out, with the same springs and such but I'd really recomend trying to get the right stuff to go with it just to be sure

[Kontalonis]

ok well cudos on a lucky break!

[fettouhi]

Lucky you!!!!

Regards

André

[rory]

Your springs and claw will be just fine...they're generic things.