<back   Jemsite > Guitars and Gear > JS (Satriani Model) Ibanez Guitars

JS (Satriani Model) Ibanez Guitars Discussion about JS (Joe Satriani Model) Ibanez Guitars

Reply
 
Thread Tools Display Modes
  #1  
Old 12-29-2005, 08:34 PM
jesuscares3  is offline
 
Join Date: Dec 2005
Posts: 1  -  iTrader: (0)

JS100 tuning problems


Hi guys,
I think this forum is great but 1 problem is that all the info just overwhelms me that I don't know where to start!I guess being a good musician is just not enough specially in a country like the US where a guitar tech is almost more expensive than the instrument itself!
Well the reason I droped in was beacuse of my tuning probs on my JS 100.I was pretty impressed by the guitar when I bought it although there was a slight buzz on the open strings.The trouble started when I changed strings & I made a big mistake of changing all 6 together.Now I'm having lots of trouble with tuning.The tuning goes out of wack each time I lock the nut.I wonder if the nut has anything to do with it.I also removed & put back the bar behind the nut that holds the strings down.Is there any particular level it should be set? I understand the trem has to float paralel to the guitar surface but then the tremolo becomes too loose & moves fwd even at the slightest bend.Is there anyway I can keep the trmolo paralel & still keep it tight.There is a place for adjutment with the allan wrench at the lower side of the trem (from the backside of the guitar).I'm not sure what it does but will adjusting this help in anyway? If any of you guys can direct me to a page where I can find simple & clear answers on setting up the JS 100 that would help a lot.Thanks v much.
quote
  #2  
Old 12-29-2005, 09:43 PM
saTa  is offline
 
Join Date: Feb 2003
Location: geretsried, germany
Posts: 388  -  iTrader: (1)

Re: JS100 tuning problems


What you need to adjust are the screws in the back of your guitars which adjust the position of the springs. Those springs must balance with the tension of your guitar strings.

What you need is a screwdriver and an accurate tuner... plug the guitar into the tuner, rough tune it. Then accurately tune the low e-string. If the pitch then goes down you need to increase tension on the back of your guitar. If it goes up, release the springs... It takes a while if you've never done it before, so best thing to do would be to get someone who knows this stuff do it and let you watch.

Else... read the guides over at Rich's site www.ibanezrules.com - they're really helpful.
quote
Reply

Tags
guitar tech


Thread Tools
Display Modes

Show/Hide Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Show/Hide Similar Threads
Thread Thread Starter Forum Replies Last Post
Tuning stability problems KevJEM7D Tech: Setup, Repairs and Mods 8 07-08-2005 01:30 PM
JS100 Problems anyone the same? AdarkA JS (Satriani Model) Ibanez Guitars 1 09-08-2004 12:42 PM
UV777BK tuning problems Given to Fly JEM and Universe Guitars 23 08-03-2003 07:25 PM
Beginners tuning problems.... GoufC Other 6-string Guitars (non-Ibanez brand) 2 03-09-2002 08:42 PM
tuning problems are over - new guitar chip james JEM and Universe Guitars 2 02-01-2001 10:48 PM

Sitemap:1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

All times are GMT -4. The time now is 09:16 AM.


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
(c) jemsite.com