Hard to tell on the pickup selector. Most rear routes using pickguards require cutting an oblong hole that basicly removes all of the material between the 2 switch mounting screws. The holes for the vol & tone knobs are also enlarged to allow the guard to slip over the shaft nut and washer.
Here are a couple of links to pics that detail a rear routed guard:
http://www.ibanezrules.com/images/te.../guard_rag.jpg
http://www.ibanezrules.com/images/te...guard_done.jpg
It's kinda hard to see in the 2nd pic, but the dark circle around the shaft of the vol pot nut is where the guard is cut out.
* If I were you, I'd resell the guard here and order a new one, cut to fit your guitar properly, from EKG at the banner ad listed above. Eddie will take care of you! *