Post pics of your own Custom modded Ibanez.

[screamndemon69]

thanks Marty. i like the yellow pups. those would look nice in my RG20th BLK.

[bammbamm]

Originally Posted by Shreddy Krueger

Here's my most "modded" Ibanez..



1991 RG 550 w/ scalloped fretboard & DiMarzio PAF PRO/Humbucker from Hell pickups.
Rewired w/ a Fender 3 way telecaster switch, tone knob and middle pickup disconnected...

Hands down my best sounding guitar...

you ever sell that, PM me, Me likey ! ! !

[screamndemon69]

that is some serious Yngwie scalloping there Shreddy!! wow!

it resembles the VSBL quite a bit.

[Shreddy Krueger]

Thanks guys!

I was totally going for the whole "Malmsteen Fender signature model" vibe on this one...but I it does look VSBL-ish now that I think of it...

Will do bammbamm..
;]

[Sirjack]

My RG770DX.



l've had dimarzios in it for years but decided to re-try the original pups.
l believe this model usually came with a F2 and F4, mine came with 2 F2's.
l bought it new in 92.

[screamndemon69]

Originally Posted by Sirjack

My RG770DX.



l've had dimarzios in it for years but decided to re-try the original pups.
l believe this model usually came with a F2 and F4, mine came with 2 F2's.
l bought it new in 92.

That is one seriously played axe you have there Jack.

The sides of the body looked rounded off and not "square" like they are when new. Did you round them or are they just worn?

[Sirjack]

Hi mate, yes l rounded them off when l sanded back the undercoat. l never really feel comfortable with sharp angles on guitars.
For me, this has given the guitar a new lease of life. It is such a treat to play.
And yes, the neck is seriously worn, l have a spare but its a rosewood fingerboard, although lve never really liked shark-tooth inlays.

[ken_r152]

Originally Posted by Shreddy Krueger

Here's my most "modded" Ibanez..



1991 RG 550 w/ scalloped fretboard & DiMarzio PAF PRO/Humbucker from Hell pickups.
Rewired w/ a Fender 3 way telecaster switch, tone knob and middle pickup disconnected...

Hands down my best sounding guitar...

I like the little tattoo art sticker on the bottom of your guitar. Where did you get it? Others like it?

[Aussie_Rocker]

Originally Posted by Eggy

^ Looks cool mate and I'm glad you like it but you bought a 370DX then spent £400 on it ??????

£650 would have bought you a LOT more than a modded 370.

Ben

but would it have been a killer, made to his specifications guitar?



proabably so

[Agent540]

My 2 RBM1
1 fully original, the second had
- DiMarzios on the middle and the neck position
- A Kent Armstrong MotherBucker
Switches are for KAMB configuration (serial/splits/parallel for the 4 coils )and pickups combination (serial / parallel )

[screamndemon69]

Agent, do you use those onstage and if so are you comfortable enough with all those switches to use them effectively? Those are ALOT of switches.

[Agent540]

sure ! lots of possibilities, but 2 or 3 really usefull

[Agent540]

My S1540FM With :
- Neck : DiMarzio PAF Joe
- Middle : Original
- Bridge : DM Multibucker ( 4 coils )

the pickups wiring is this one :

the added switch is an on/off for the middle PU.

[Agent540]

Same PU wiring for my S540BK with Bill Lawrence XL and L and a DM DP184 (in the middle pos)



I've used all the pieces (except the PUs, of course) of an S540OL ( the body near the S540BK )

[screamndemon69]

Originally Posted by Agent540

sure ! lots of possibilities, but 2 or 3 really usefull

Cool and you answered my next question