Need a builder for an Ibanez Replica

[Scarve]

Yeah right!

Wanna know the specs?

Neck :

-Scale 25.5, bolt-on or neckthrough (depending on the price)
-Maple,satin clear finish (maybe with reinforcements)
-24 frets
-Thin Dunlop fretwire to minimize fretbuzz (I use thick strings)
--Ibanez 7 headstock, Reversed, with traditionnal Tilt and angle, a Logo on front
-Satin finish, DARK red (maybe with satin black binding)
-Graphite nut or Earvana
-Gotoh tuners, Black/Black Nickel
-Ebony Fretboard (maybe with satin black binding)
-No markers on fretboard, only on side

Body :

-RGA-7 (RG archtop), maybe 5% smaller
-Alder
-Left Horn as pointy as the lower one
-Finish matching with the headstock
-Seymour Duncan Blackout7 active pickups (EMG sized), Bridge and Neck
-TonePros Tune-o-matic bridge or other strings thru body design, Black/Black Nickel
-1x Volume pot, Black/Black Nickel
-3 way switch
-Recessed jack input

Those are the main specs.

Shoot me ANY contact you have seriously. I never thought it would be so hard to have an Ibanez Replica built.

I already emailed :
EKG guitars, without answer
LGM guitars without answer
SIMS custom shop, without answer

Thanks

[dannymills]

Chris Woods..?

[dannymills]

Legacy One

[dannymills]

Actually, Chris Woods has done some 7 string RGAs or something... check him out for sure.

[Scarve]

Yeah I heard good stuff from Chris's work too. But importing from UK wouldn't be at great deal at all for me...

I pm'd Legacy one for quotes

[Aris_T]

You should check this guy

http://www.lootnick.com/gallery.php

He's in Polland, so I guess there won't be a huge import cost and a far as I can judge from the pics, his job is great!

[LonePhantom]

Originally Posted by Scarve

Yeah I heard good stuff from Chris's work too. But importing from UK wouldn't be at great deal at all for me...

I pm'd Legacy one for quotes

Dude, you DON'T want to deal with Legacy One. There is a massive thread dedicated to people venting their frustration with Legacy One's sub-par quality parts, and that's only if they are able to get them. Many have paid and ended up with nothing. Do not go anywhere near Legacy One unless you really like giving money away for fun.

[Scarve]

Originally Posted by LonePhantom

Dude, you DON'T want to deal with Legacy One. There is a massive thread dedicated to people venting their frustration with Legacy One's sub-par quality parts, and that's only if they are able to get them. Many have paid and ended up with nothing. Do not go anywhere near Legacy One unless you really like giving money away for fun.

DAMN! hahha

**** man, I am ****ing going to get my replica built or what?

[Aris_T]

Originally Posted by Scarve

DAMN! hahha

**** man, I am ****ing going to get my replica built or what?

http://www.lootnick.com/gallery.php

[modulo]

HI!

Aucun luthiers a montreal veulent le faire???

MF, Liberatore, SD......???

[dannymills]

Originally Posted by Scarve

Yeah I heard good stuff from Chris's work too. But importing from UK wouldn't be at great deal at all for me...

He's based in the US....

I said Legacy One as a joke .

[Scarve]

Really? US based? I thought He was in the UK. Then things change a little bit.

[Scarve]

Originally Posted by modulo

HI!

Aucun luthiers a montreal veulent le faire???

MF, Liberatore, SD......???

En fait Stephane Denis ne fait pas de fabrication pour cause de manque de temps. Mais si j'achète des pièces, il est game pour l'assemblage.

MF et Liberatore vont me charger une caliss de beurrée pour rien. J'préfèrerais ultimement y aller avec un body fait par CNC, qui est pas supposé coûter ben cher, et un neck comme jle veux, l'assembler, poser les pickups et hardware pis faire le vernissage ici même.

[Ironjose]

i dont know if interest you but i have a person here in guatemala... but the overseas thing might be a little problem.... jajaja anyways here is the link if you have a question or two http://www.iglesiasguitars.com/instruments.html

[Ironjose]

what i need is a blueprint of a 7string RG... or UV... where can i get it?