Quick Tuning on Lo Pro Edge 7 - Trem Block Question - Jemsite
Other 7-string Guitars 7-string, 8-string & extend-range guitars guitar talk only here. All makes and models except the Universe.

 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 08-07-2001, 09:49 AM Thread Starter
 
Join Date: Jul 2001
Location: California
Posts: 466
Quick Tuning on Lo Pro Edge 7 - Trem Block Question

I just received my RG2027X from Rich (who, by the way, I highly recommended - ridiculously smooth transaction) - what a sweet guitar!! *One question I have though which I couldn't answer based on archive searches, has to do with blocking the trem for tuning change purposes. *

My intention is to string the guitar with .011 through .058 strings and tune down to A as standard practice. *However, there are certain occasions when I'll want to tune back up to B (for a more standard tuning). *

Are there any commercial devices which can handle this scenario without having to readjust the trem? *As an alternate approach, could I not simply insert a shim of the appropriate width of some sort between the rear body cavity wall and the trem block? *I recognize that in the latter approach I'd lose the tremolo ability but I'm willing to forego this in exchange for simple tune ups to B and then back to A.

Thanks,

Randy
rlintz is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 08-07-2001, 05:08 PM
 
Rich's Avatar
 
Join Date: Dec 2000
Location: South Jersey
Posts: 23,619
Quick Tuning on Lo Pro Edge 7

Thanks Randy. This topic has come up many times, I'm sure a search will reveal the results. Unfortunately I never paid much attention to what was said
Rich is offline  
post #3 of 6 (permalink) Old 08-07-2001, 05:18 PM
site founder 0% owner
 
jemsite's Avatar
 
Join Date: Nov 2000
Location: NJ - USA
Posts: 10,259
Reviews: 1
Quick Tuning on Lo Pro Edge 7

there is no device that will do this keeping the trem floating. You could find the 'unfloating device' as i've called it or make your own. See GUITARS the click "other stuff" for pictures. It stops the float, allowing retuning very quickly... glen
jemsite is offline  
post #4 of 6 (permalink) Old 08-08-2001, 12:13 PM
 
Join Date: Jan 2001
Location: Around Boston MA
Posts: 522
Quick Tuning on Lo Pro Edge 7

You could even setup the trem in A tuning, and then cut and mold (by sanding) a piece of very hard wood into a block which fits perfectly between the trem and the side of the cavity so if you tune to A and take the block out, the trem floats in the right position but if you insert the block and begin tuning up to B then the trem will stay where it is...assuming the block fits right.
ChrisReedSmith is offline  
post #5 of 6 (permalink) Old 08-09-2001, 01:48 PM Thread Starter
 
Join Date: Jul 2001
Location: California
Posts: 466
Quick Tuning on Lo Pro Edge 7

A friend of mine gave me a big block of solid maple. *I'm going to try creating a block out of the maple. *Thanks for the help.

Randy
rlintz is offline  
post #6 of 6 (permalink) Old 08-12-2001, 02:45 PM Thread Starter
 
Join Date: Jul 2001
Location: California
Posts: 466
Quick Tuning on Lo Pro Edge 7

I have another question related to this topic. *When I pull off the trem cavity cover on my RG2027X (as the picture below details), I see the braided piezo wire coming out of the trem block. *I also see what appears to be electrical tape or a rubber band wrapped around the trem block. *I'm not sure where the piezo wire exits the trem block and if it might be underneath this tape/rubber band. *My concern now is that if I insert a block of this maple between the trem block and the back wall of the cavity, I might somehow pinch or shear the piezo braided wire as I'm not sure of its path.

Any ideas on the exact routing of this wire and if I'm safe inserting a chunck of maple to block the tremolo?

Thanks again,

Randy

rlintz is offline  
Reply

Tags
cavity cover , trem block

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB Edge Pro 7 Trem Block (sustain block) magic_golem Classified Ads: Guitars and Gear 0 04-24-2011 02:49 PM
FT: Floyd Rose Brass Trem Block for Ibanez Edge Block t1r12003 Classified Ads: Guitars and Gear 0 02-27-2009 08:19 PM
Quick question about tuning stablility atifman Tech: Setup, Repairs and Mods 2 04-23-2004 09:23 PM
edge spring block lock, does it affect tuning stability satchman Tech: Setup, Repairs and Mods 5 03-03-2003 09:21 PM
Trem removing... just a quick question... - just a quick que Kev Brigden Tech: Setup, Repairs and Mods 1 03-12-2002 03:56 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome