Your Dream Ibanez... - What is it?

[Wound]

If Ibanez would custom make a 7 string for you...free of charge, what would you want?

hmmm I donno too much about the different types of Woods n stuff...but i hear good stuff about basswood, donno about the neck...heh...i want the good sh*t
tho! c",)

I would want it a set bridge string through.
Neck through...
EMG 707 in the bridge and just a volum knob...like the Cazares custom.
Black paintjob, possible matte, with my bands W logo covering the whole front in red...
Maybe the band logo on the 12th fret, if that wouldn't b too much...
Black harware...

did i leave anything out...

[trajectory fish]

i'd get a 7 string version of the john scoffield model.

[Two hands31]

I'd say you want something similar to the customs Cazeres had made. *I think they were mahogany, and it sounds like you'd enjoy a Fixed-Edge-7 quite a bit.

[rlintz]

RG7CST with a single coil in the middle, TZ in the bridge, PAF 7 in the neck. *Push/pull on the tone pot to split the neck humbucker. *Maple board. *Single stereo jack. *KJG wiring mod. *Only thing I'm undecided about is either to go with no inlays or something custom. *

That would just about do it.

[nuno]

540PII [size=0.5](Skolnick)[/size] body shape
ToneZone at the bridge [size=0.5](on wood)[/size]
C3 [size=0.5](for 7-strings)[/size] single at the neck
Lo-Pro
BackStop
just the volume knob [size=0.5](Sabre type - push/pull)[/size]
oil-finished mahogany body
non-laquered bolivian rosewood either for neck and fingerboard
last 8 frets scalloped
no inlays
no bindings
tilt-jack
matched headstock [size=0.5](oil-finished bolivian rosewood)[/size]
white logo
black hardware

[masterplan]

body like a jem..a 27 fret neck...a cool color wich I canīt think of know......good sound....a trem wich doesnīt need much work and STAYS IN TUNE!!!!

[nuno]

so... you mean the Edge!

[Sevenstringer]

This would be mine:

Sabre Mahogany body neck thru
Maple/Purpleheart Neck Laminate
EMG 707's
Double Edge trem
With Roland MIDI capabilities
Sperzel Locking tuners
Ebony Fingerboard with offset dots


p.s. Nuno * *Looks like I will be changing the strings soon on the Dino. Where should I send the pix?

(Edited by Sevenstringer at 8:58 am on April 7, 2002)

[nuno]

oh, that's great!!!
send them to -m-@libero.it [size=0.5](dont forget the hyphens)[/size]

get them the most clearer as you can, and take them very close, please!!!
hey, wouldn't be bad to share them to the whole Jemsite family, huh?

[caprile]

my dream ibanez would be an ATD swirled 91' UVMC. a big part of the dream would be to get it cheap too.

[Two hands31]

nuno on 1:02 pm on April 7, 2002
oh, that's great!!!
send them to -m-@libero.it [size=0.5](dont forget the hyphens)[/size]

get them the most clearer as you can, and take them very close, please!!!
hey, wouldn't be bad to share them to the whole Jemsite family, huh?

I agree, share! *lol *Two_hands31@hotmail.com

[Sevenstringer]

HA *OK Twohands * What Nuno is referring to is the trem cavity under the Fixed LoPro on the Dino LACS that I have, just in case you were wondering what kind of pics you would be getting. *haha

[Rich]

I'd post some of mine but my floppy drive is dead till tomorrow.

Hey Ron, is yours blocked the same way mine is? 2 pieces of wood epoxied in on either side of the trem block?

[Two hands31]

Sevenstringer on 7:23 pm on April 7, 2002
HA *OK Twohands * What Nuno is referring to is the trem cavity under the Fixed LoPro on the Dino LACS that I have, just in case you were wondering what kind of pics you would be getting. *haha

No prob, I've been interested in the Fixed LoPro thingy. *

[Spiral Acid]

Mine's more like an RG1077XL,

with Ebony fretboard,
no inlays,
Fernandes Sustainer,
Piezo Bridge, (Double Edge)
Single output, (Mono)
Black finish with White Binding
Bubinga Strip
HSH config

Love it!!!!