Converting Rg321MH to PGM style?

[son_of_zion]

Im thinking converting the RG321MH to PGM style somehow, what tools to i need to cover those pickup selector, volume control holes? this is my first time going to do customizing, so im gonna need all your help guys. TY cheersss!

[son_of_zion]

anyone have any ideas?

[jkahrs]

To get the exact PGM pickup and control layout, you've got a lot of wood work ahead of you. The entire control cavity, jack mounting hole, pickup cavities, volume, tone, and screw holes for the 5-way switch, and selector switch slot all should be filled. With mahogany in your case. (That's if you want to use the same body wood anyway) As far as tools go, a router is a must. A dremel is handy too. Hammer, wood glue, sanding block, not to mention all the sandpaper, exacto knife, files, access to a bandsaw, or good hand saw is a must too. It's a very ambitious project, especially for a first timer. --Jason

[RSVampire]

unless your into serious modifications... I would just buy a PGM style body from EKG.

http://www.ekgguitars.com/services.htm

[rty13ibz98]

yeah, just live with the controls and get a set of decals. i did this to my rg7321 and it looks killer. white on black with matching pickups! it looks really good. the binding on the neck sets it off, too. while not the pgm500 i used to own, it is a smoking axe after the less than $150 mods.

rich

[GP13]

hey rich, can you post a picture of that rg7321?