Does a Edge Pro II fit in a Lo TRS cavity?

[bdk]

I have an S470FM, a great guitar, well...except for the trem, can an Edge Pro II fit in there? the original edge almost fits, but not quite. Is the edge pro II ok? or is it junk also?

[albee1952]

The EP II is a decent bridge but will require some routing to make it fit as the block is way bigger as compared to the TRS (or the Edge for that matter). I have fitted the Edge in place of the stock bridge on that same guitar. What it takes is: pull the studs and inserts, route the flat part (where the inserts go) deeper by 3mm. re-drill the insert holes with an 11mm bit and go 3mm deeper so you can press in a set of locking stud inserts. Then an Edge bridge should pop in like it belongs.