Edge Bridge Saddle

[drthunder]

I searched this forum and found a similar topic to this but it wasn't entirely answered, so I'll post it again. I recently did the MF thing and got an RG570. It plays great and I have no problems with it other than the saddle on the A string. The saddle buzzes pretty bad when I hit the string anything other than real light. It's the only one that does it. When I touch it stops rattling so I don't know if it is something that can be tightened or if it has to be replaced. I read in the other post about taking the plate off the back and tightening the plate that crimps those fine tuner thingies but I know that won't work because its already tight enough. Have any of you experienced this and if so what did you do to remedy it. I really don't want to send it back because I love it otherwise, but I don't want to spend extra money on something that was originally defective. (BTW, how much do saddles cost separately if I have to replace it)
Thanx
Dan

[jemsite]

very obvious.... but is the saddle lock down screw tight? If you call them, you should be able to convince them to ship you a free replacement saddle... glen

[nuno]

try swapping the A-saddle with another (from the same bridge).