help setting the action with lo pro edge - i want low even a

[puppiesonacid]

this is my first guitar with a trem system. all i own is ibanez guitars but this is my first with the lo pro edge. its a great system well built and all but i have no idea how to set up the action. i dont think i seen a "how to" in the tech section but ill check again.

if you guys have tricks or secrets for it can you share them? its a discontinued model and ibanez radius 540HH(thanks rich). i jus want to set it up like satriani's guitar. thanks

God bless

puppiesonacid

[Kevan]

Memorize the pages here:

http://www.jemsite.com/tech/

You'll thank me. *:-)

[ripl3y]

All the tricks and secrets are in this site's very tech section (as posted above by Kev)

If you need any clarification or help just mail me anytime.

Have fun

Steve

[puppiesonacid]

thanks guys, ummmmm i did the thing where you use the nail polish to get the bar to stick better. well i think i put to much on cuz now the bar wont come out hahah. i tightened the arm holder too cuz it was wobbling, the little screw thats on the underside of the arm holder(inside the trem cavity) its all the way up, closest to me when im looking down at it. *what do i do to get the bar out?

i have wierd noises that i uses for teh bar for when its not used for regular whammy uses, so its kinda important that i get it out soon. thanks again

God bless

TOny(puppiesonacid)

[Kremlin]

I don't think I've ever seen a JS shipped from the factory WITHOUT a loose arm holder..

[SalemB]

The following thread is talking about wierd sounds from the trem. IS this what you're hearing?
http://jemsiteforum.com/board/topic....&topic=454

To get the bar out I think you just have to pull a little harder. As long as you didn't mix up the nailpolish with super glue, it should come out.