How high are the saddle-"Steps" on EDGE trem?

[Metallion]

How high are the saddle-steps, elevations on wich the saddles rest; on the EDGE, Edge PRO and Lo-PRO?
0.5mm each?

See: (Floyd rose (11.7 - 12.2 - 12.7 = 0.5 steps))


Also:
What is the individual String spacing at the Saddles on EDGE, Edge Pro and Lo-PRO?
10.5, 10.7 or even 10.75mm?

[LonePhantom]

The saddles are all the same as far as I can remember.

[Metallion]

Originally Posted by LonePhantom

The saddles are all the same as far as I can remember.

But what are the requested MEASUREMENTS then?

[Jaden]

Originally Posted by Metallion

But what are the requested MEASUREMENTS then?

wow, how polite... why ask when you can DEMAND !
how many more requests for information regarding trems are you going to post before you actually say - thankyou to someone for their information.
why dont you buy yourself a vernier caliper and measure away to your hearts content ?

I will tell you that saddle elevation = fingerboard radius... once the guitar is setup properly.

[albee1952]

One is promted to ask, what will the info do for you? Don't forget, the FLoyd Rose uses 3 different height saddles while all the Edge variants use the same saddle with raised areas on the baseplate. stewmac.com sells a set of radius guages that might be handy if you are looking to experiment. Also, the saddles on any of these bridges can be shimmed. All-Parts makes shims or you can cut some from a coke can.

[Metallion]

The String Center-distances at the Edge trem saddles are the most wanted.
10.5 or 10.6 or 10.7mm?
Even the Local Dealer do not know this.

I looked at a Lo-Pro Edge and my guess is 0.4 - 0.3 ^ 0.3 - 0.4 height Steps.
Correct, or?