inf1 and inf2 pickups

[jcmix]

i'm rebuilding my rg450 and im only using the two original hums inf1 in the neck and the inf2 in the bridge. the inf2 has 3 wires and the inf1 only has 2. how do i wire the inf 2 so all i get is full humbucker? i'll be using a 3 way switch like on a les paul.

[giannifive]

If you have an ohmmeter, measure the DC resistance of each of the leads relative to ground. The one with the largest resistance (it should be about 2x the other) is the lead for the full humbucker. The other is for one of the single coils.

Have fun!