Jem dimesions needed (depths)

[RGM]

Hi,

I need a few dimensions for an original JEM, i have the blueprint from this site but it is missing depths.

Anyway heres what i need:

-Pickup cavity depths.
-Electronics cavity depth including switch section depth.
-Lion Claw depth/Bridge routing depth.
-Neck pocket depth.

Thanks to anyone can answer any of those!


Cheers,
RG

[Jaden]

do you have the blueprint available from this site ?

http://www.jemsite.com/jem/origin/jem777_blueprint.jpg

if you do then all the relevant depths are there...

If you didnt have it - you do now

if thats the one you have then you look at the depth indicated on the drawing..

I.E - the depth for the pickup routes is D=18...
which means...... yep, the depth to rout is 18mm

good luck.

[RGM]

Originally Posted by whatisshredding

do you have the blueprint available from this site ?

http://www.jemsite.com/jem/origin/jem777_blueprint.jpg

if you do then all the relevant depths are there...

If you didnt have it - you do now

if thats the one you have then you look at the depth indicated on the drawing..

I.E - the depth for the pickup routes is D=18...
which means...... yep, the depth to rout is 18mm

good luck.

lol.. i have that blueprint, i just didn't give all of the dimensions a good look, which was kinda stupid i guess

Anyway thanks for pointing that out!

[sers]

Does anybody have the blueprint of the 540PII ???
tnx

[Jaden]

Originally Posted by RGM

lol.. i have that blueprint, i just didn't give all of the dimensions a good look, which was kinda stupid i guess

Anyway thanks for pointing that out!

your welcome, its easy when thats what you do for a living

BTW ---- if anyone DOES have the 540PII - or s-series scematics..
I would also like them

Jaden

[kelmaur]

i tried printing the JEM blue print out and it is huge..nay body have a copy o fi that will fit in on 8 1/2 x 11

[Jaden]

Originally Posted by kelmaur

i tried printing the JEM blue print out and it is huge..nay body have a copy o fi that will fit in on 8 1/2 x 11

scale it.

[RGM]

I know that there is very little chance, but does anyone have a jem template or dxf/dwg with AANJ?

[RGM]

Never mind, all found =)

[Jaden]

Originally Posted by RGM

Never mind, all found =)

really, I dont have those - could you send them to me ?- Ill PM my e-mail

[mar01]

is the thickness of the body the same as regular rg models?

[RGM]

Originally Posted by mar01

is the thickness of the body the same as regular rg models?

44mm i think, so yeah about the same as a regular RG.