Lo Pro help again

[metalgandalf]

okay,

seems like an easy fix. every once in a while when i use the trem bar, it has this annoying slack to it that feels kind of like ..........um.......sort of like a joystick when it's worn out a little bit and it has that neutral slack that doesn't affect anything. when i rotate the trem arm around clockwise, it seems to tighten that thing that it is situated in and the problem goes away, but it doesn't tighten it completely so that annoying bar slack gradually comes back the more the trem hole gets loose, so now i'm curious how i can tighten the hole up a bunch, to keep it from doing this. sorry, that probably didn't make much sense. thanks in advance!
~joel

[Idiot]

I am assuming you mean the trem arm is rattling around in the arm holder.

There is a section in the 'tech' area about this. You just need to tighten your arm holder - was happening on my JS1000 - I didn't have the correct 10mm socket, however, so I just 'temporarily' tightened it by using a wide blade screwdriver in the slot on the top of the arm holder and gave it a stiff clockwise turn - it'll hold for a while, i'm hoping.

Oh, and BE CAREFUL - don't slip and scratch anything... or strip any threads.

[metalgandalf]

problem should be solved, i'll have to do that. thanks a lot idiot....oh....uh.....don't take that the wrong way. ......ya.
~joel