question for swirlers

[Ki swordsman]

i don't think this would be giving away any trade secrets
when you swirl a guitar which method of applying paint do you use?

(a)dip body in through paint and back out through paint(doublelayer)

(b)dip body in through paint, blow away paint and make hole in surface,
pull out avoiding second layer

(c)dip in without paint(avoiding 1st layer), apply paint, pull out through paint so it only gets 2nd layer

Thanks

[cerealk]

http://www.jemsite.com/phpbb/viewtopic.php?t=4911
http://www.jemsite.com/phpbb/viewtopic.php?t=4891
http://www.jemsite.com/phpbb/viewtopic.php?t=4892

all here
http://www.jemsite.com/phpbb/viewforum.php?f=2

[Timanator]

Originally Posted by the third eye

(c)dip in without paint(avoiding 1st layer), apply paint, pull out through paint so it only gets 2nd layer

Do you think paint will stick when it has water between it and the primer coat?

[Ki swordsman]

Originally Posted by cerealk

http://www.jemsite.com/phpbb/viewtopic.php?t=4911
http://www.jemsite.com/phpbb/viewtopic.php?t=4891
http://www.jemsite.com/phpbb/viewtopic.php?t=4892

all here
http://www.jemsite.com/phpbb/viewforum.php?f=2

dude, none of these answer my question

i don't want to know which way is 'right'
i'm just interested in which way some swirlers prefer
what are the pros and cons..etc

Timanator-
i haven't tried it myself but i read somewhere on the forum
that someone was doing it that way

[EKG]

(a)dip body in through paint and back out through paint(doublelayer)

You can do this, but I think the results would not be desirable.

(b)dip body in through paint, blow away paint and make hole in surface, pull out avoiding second layer

This method makes the most sense to me.

(c)dip in without paint(avoiding 1st layer), apply paint, pull out through paint so it only gets 2nd layer

This might work, but as mentioned, water between the primer and paint doesn't sound good.

[Ki swordsman]

cheers guys
i was tired when i posted and didn't really think it through