So I replaced the bridge pickup on my
S Series 1520 with a Dimarzio Tone Zone. For some reason, it sounds like the coil is split or something. I am not getting a very thick tone, so I figured I may have just wired the 5 way switch up wrong. For now, the neck pickup is staying, so i have left that
wiring intact. Here is a picture of how it is wired.
I have the Tone Zone red wire to the far left lug, the black and white wires on the 5th lug from the left, and the bare and green wires to ground on the volume pot. Is this correct for a 5 way switch?
Thanks!
Cameron
