RG1570 Megaswitch P-Model...will it fit?

[Volgore]

I am getting a new 1570 soon, it has 3 pickups h,s,h but I will probably not use the single coil.
I want to use 2 aftermarket humbuckers like Dimarzio.

This 5 way switch can do inner and outer coils as well so that is why I am interested in trying it with 2 humbuckers.

Megaswitch P-Model

"Sorry I cannot post a link, I only have 2 posts so far"

[reguv760]

it should... Megaswitch's are about the same height as the stock 5-way.
I have the E-model in my 760.

Reg

[Volgore]

Does the switch need to be wired up exactly they it is in the Megaswitch diagram?

It shows how everything needs to be connected, humbuckers, switch, volume and tone.

[reguv760]

well, the diagram is the basis of how the switch works. Wire humbucker leads, ground and output to volume pot to the appropriate lug on the switch and you're set.

Reg

[Volgore]

hmm maybe i should just a get a ym-30 switch and keep it simple.

so it would be bridge, bridge/neck, neck. I'll have to try and find a ym-30 switch somewheres .