Will a fender fat strat pickguard..

[-Rhaab]

fit my fender standard (mex)?
I looked in my standard, and the bridge seems to be routed with enough room for a humbucker and I'd like to see how my tone zone sounds in it.

[CosmicDebris]

I would suppose it depends on if the body is routed for it. If the body is routed for 3 singles then you would have to route it for a Humbucker. Dimarzio does make a TZ in a single coil size.

[CityofBlindingLights]

Yes, so long as the fat strat pickguard was formerly on a Made in Mexico strat, otherwise one screw hole will be off, but that can easily be drilled.

Other than that, yes it will work. And if you have a MIM strat then yes the bridge rout most likely is for a humbucker, that way Fender can just CNC all the bodies the same way for standard and fat strats.