Wiring for an RG620x w/DiMarzios

[ColorsFade]

I've got a wee bit of a problem

I need to install two DiMarzio Evolutions in an Ibanez 620x (piezo model). The Ibanez website has a diagram for this but it is very poor quality:

http://www.ibanez.com/support/wiring/rg620x_2002.gif

Additional flies in the ointment:

(1) The switch on the guitar is a 3-way, not a 5-way (but that may be remedied)

(2) The bigger issue: the Evolution neck pickup is a 4-conductor pickup. It's got five wires instead of three, like the default Ibanez neck humbucker.

If anyone has a clue/hints/diagrams/tips on how to properly wire this up I'd appreciate it I don't know what I can do in return, but I sure could use some help on this one.

Thanks,

ColorsFade

[horstausmforst]

http://www.jemsite.com/forums/showth...place+dimarzio

this might help.

[Vim Fuego]

Here's a better picture of the same thing,
http://www.ibanez.com/support/wiring/RG1620X.gif
Does your guitar have a 3 way slide switch, like a tele or a 3 way toggle? you may need the following diagrams for that bit:
http://www.ibanez.com/support/wiring/2007/RG2620E.gif for 5 way, and diMarzios
http://www.ibanez.com/support/wiring/2007/W070016.gif for 3 way with diMarzios
Jim