Just clearing out some odds and ends to make some space for new projects.
Anyone interested either PM me or post in the thread with your email and I’ll send you pics. I would prefer to sell in the UK, all prices are in UK £’s, my **** name is *richf* for feedback. I would also prefer Paypal but cheque will be okay but you’ll have to wait for it to clear before I send the item. All prices are plus shipping costs – let me know where you are and I’ll let you know the exact cost.
Ibanez Jem 6-string copy body, basswood, built by Monster guitars. Brand new, never used. Made to fit Edge or LoPro trems and All-access 24-fret necks. Routed for two humbuckers and a single (like a normal Jem). I haven’t done anything to it from new so it needs finishing by sanding, etc and there are a few small checks in the wood around the edges from when it was made that need filling and sanding back, or sanding out, or grainfilling, etc. Overall it doesn’t need much work and you could just oil it and use it, or use it for a swirl project, etc. This is the body only so it needs everything else to make a finished guitar (maybe use an RG as a donor for all the parts?) but does come with black backplates. £90
Another Jem copy body, exactly as above but Alder instead of basswood – I don’t seem to have the trem backplate for this one but it does have the other two backplates. £90
I also have one clear scratchplate that fits either of these Jem bodies £15
DiMarzio AirNorton 7-string DP793 neck pickup, black and cream zebra coils (I think it’s called reverse zebra colours so the cream is towards the bridge and the black towards the neck). Only used once on one guitar so it’s still got about 24cm of wire left, pretty much perfect apart from a tiny bit of discolouration on one pole-piece which would probably scrape off anyway if it bothered you. £40
DiMarzio AirNorton 7-string DP793 neck pickup, black, around 16cm of wire, pretty much perfect condition. £40
6-string Ibanez original Edge trem, black. Just the trem only, no springs or claw, etc. The actual trem is in very good condition, just a few tiny marks in the black and a little bit of wear on the bass saddle, and a bit of knife-edge wear. But it does need the little spring clip that goes in the bottom of the trem arm socket, and the top of the same socket looks like someone tried to tighten it with a screwdriver and burred it a bit. I’m sure you could get a new trem socket from someone like Rich at Ibanez Rules. £60
Six Ibanez grey metallic machineheads for a left hand neck or
reverse headstock. £15
Ibanez 7-string pickup from an RG2027, I think it’s the bridge pickup, great condition, 16cm of wire. £10
Fernandes 7-
string bridge pickup, over 20cm of wire. Originally came with a sustainer but I replaced it with a dimarzio so is now surplus. £10
Two cheap Strat copy single coil pickups with two different white covers. £5 the pair
Dimarzio 6-string single coil pickup covers:
• With pole pieces, two black, one blue, one pink
• With rails, two black, one purple
£5 for all 7.
Chrome licensed Floyd-rose style 7-string trem, inc posts and anchors, claw, 3 springs, and trem arm. Is missing one of the tiny string clamps but you can get them very easily off the ‘bay. £15
7 Fender chrome machineheads from a Squire 7-string Strat. £15
Fender Squire 7-string guitar body, purple, has been quite nicely modded to fit a Floyd copy trem in black (included). Also included are the electronics, scratchplate inc the two original humbuckers and another plate with spaces for 3 single coil pickups, and the neckplate and screws. It has a few small dings but nothing major. If you bought this and the machineheads above then all you’d need was a neck to finish the project. £40
