FS: Dimarzio X2N, IBZusa F2 C2 F1, and TOM roller bridge.

Stygian · #1 08-28-2009, 08:49 PM

*Dimarzio X2N for $35 shipped

In good condition, pickup face has very little wear, but has been sort of modded. The mounting holes have been drilled slightly so the pickup can be direct mounted. While cleaning the pickup I polished the brass base and removed the tape, it was very dirty. The individual coils are still wrapped in clean factory tape, but you can see a little more of the coated pickup wires (coils are still covered). Stew mac sells official wrapping tape, but the pickup works fine either way. It is F spaced, for the bridge position, and has over 7 inches of wire left.

http://i544.photobucket.com/albums/h...c/x2nangle.jpg
http://i544.photobucket.com/albums/h...ic/x2nback.jpg
http://i544.photobucket.com/albums/h...ic/x2nside.jpg
http://i544.photobucket.com/albums/h...lic/x2ntop.jpg

*Ibzusa / Dimarzio F2 for $25 shipped
In good condition. It's from a 1989 S540, bridge position. The logo is actually still in tact, minimal wear to the logo and surface. The pole pieces were originally black and have been polished to a very shiny chrome. Has 6 inches of wire, came right out of the original guitar.

*Ibzusa / Dimarzio F1 for $25 shipped
In good condition. It's from a 1989 S540, neck position. The logo is worn on this pickup, but the surface has minimal wear overall. The pole pieces have been polished up, considering the age of the pickup they were dull. Has over 12 inches of wire left, came right out of the original guitar.

I am also selling the C2 single coil, I just don't have any pictures of it right now. I'll sell it for $15 shipped. It has plenty of wire left and is the most physically worn of the 3 pickups from the guitar, but it still does the job.

http://i544.photobucket.com/albums/h...llic/set01.jpg
http://i544.photobucket.com/albums/h...llic/set02.jpg
http://i544.photobucket.com/albums/h...llic/ibzf1.jpg
http://i544.photobucket.com/albums/h...llic/ibzf2.jpg

*Chrome TOM roller bridge for $14 shipped
This fits a Jackson DKMGNT. It's in like new condition. The saddles are roller pieces so your strings rest on on a smooth surface, reducing string breakage.

http://i544.photobucket.com/albums/h...c/rollerbr.jpg