Got a bunch of things collecting dust that need to go to someone that will get some use out of them!
First up is a 1993 Jackson Dinky Reverse. This one is in case baby, time capsule condition. There are only a few minor blems; Some pick swirling, a small ding on the back, a scratch near the output jack, and the former owner was apparently having some trouble with the high E buzzing due to a low nut, but rather than shim the nut, he attempted to shave the first fret down a little bit. This has very little effect on the playability and action of the guitar. I have since shimmed the nut and that solved the issue. Has the JT-590 tremolo, which is the basic Schaller but branded as Jackson. Superior to the JT-580 and JT-580 LP, which are rebadged TRS trems that come on all of the mid level Jacksons today. Comes with OHSC. $300 plus actual shipping.
Next is an RG 560 body. She's been through some battles, but still has some love to give. Comes loaded with electronics, but one of the half shafts of the volume pot broke off, and the output jack is intermittent. The pickups I can only assume are V2, and 2 S1's, the middle of which is reversed polarity for humbucking when combined with neck single coil or the split coil of the bridge humbucker. Also includes the neck plate and screws. Does not include the tremolo screws. $50 plus actual shipping. I'll consider parting it out as well.
I've also got 2 spare tremolos. I'm looking to trade one for a black Lo Pro Edge. One is a gold Lo Pro, and the other is a black Edge. These aren't really for sale, as I like to keep a spare parts on hand for interesting projects that come my way, so I'll still keep whichever one doesn't get traded. I'll consider trading for a Floyd Pro as well.
I've also got a lefty Floyd locking nut in cosmo black off of a Japanese made RG470L. Comes with pads, string retainer bar, and the 2 through screws. $20.
And, finally, I have too many high gain screamer heads, so I need to get rid of my Ampeg VH-140C. These were made in the early 90's and are highly regarded amongst the metal community. It is solid state, but it screams! This one is in good shape, with only a few blems in the tolex. However it is missing the top handle, Ampeg logo, and one of the bottom rubber feet. $400 plus actual shipping.
Pictures of all of these are available at my flickr page at
http://www.flickr.com/photos/33701682@N05/ . Shipping is from Portland, OR, 97214. I can do PayPal or MO.
