Quote:
|
1) Have any of you guys worked with the MIDI switching capability on the Legacy? Can I switch Legacy channels with the "switch out" on my G Major?
|
I don't have a Legacy head but i'm familiar with the G-Major. If the Legacy uses a stereo cable-end for its footswitch, a stereo cable link from the G-Major to the Legacy should work. Connect + program the Midimate to the G-Major. Access Level All/Relay 1 + 2 to program the channel switching. If it works, Relay 1 changes clean to dirty and Relay 2 enables/disables the Reverb. If you only need to change the clean/dirty channel, i would assume connecting a mono cable from the G-Major to the Legacy head should do the trick.
Quote:
|
2)What kind of cable do I need?
|
a mono or stereo cable long enough to reach the head from the G-Major. According to the manual on the Carvin site:
"Most foot pedals with 2 switches, a stereo cord and plug will work... first the channel SELECT switch on the front panel must be selected to the "OUT" channel 1 position before the footswitch[channel switching] will work."
Reg