Jem jack output & Neutrik plugs

[frankde9]

Hi,

I'd like to buy some jacks with Neutrik plugs to connect my Jem with my amp but I'm really wondering if those plugs arent too big for the special output implementation
Neutrik plugs look larger than standard plugs and a jem has the jack connection quite within the body like this
http://homepage.ntlworld.com/ibanez....k/dbk_jack.jpg

do you know if the Neutrik plug's width would fit in this kind of input ?

here a Neutrik plug picture : http://www.neutrik.com/client/neutri...210_120431.jpg
They are 5/8" diameter at the largest diameter

many thanks
Frank

[frankde9]

UP
does anyone have experienced these Neutrik plugs with a jem ?
thx

[Jaden]

Frank, you should be OK, JEM jeck counterbores are larger than 5/8"
I drill them at 20mm - about 3/4" (from memory) if I get out to the workshop I could tell you exactly what I drill them at but.....
the jack plug will fit.

[Tank]

I use a Planet Waves Circuit Breaker Cable, which has a really big plug and have not problem whatsoever in my JEM.
Only thing is you should be careful when you plug it in, so you do not accidently chip off paint...