Loop switcher help

[lateralus819]

so i got a problem, i ordered a loop switcher and im totally confused as to how to hook it up....heres how it runs...the return is connect to the output on my MXR 10 band EQ then that runs to my Boss DD-3 then the send runs into the input on the DD-3 thats the effects loop. the input on my amp runs down into my rocktron hush that runs into the out of my TS-9 that runs into the out of my SD-1 then the input of the SD-1 goes to my guitar...


The looper is a 2 loop pedal by loop master, it has a out, and an in on the sides and on the top is receive/send for loop 2 and the other side has receive/send for the loop 1, how do i hook all this up?i hooked it up fine with it all running to the input of the amp but it didnt sound the same so im clueless.

i wanna keep the dist/hush in front and the other 2 in the loop and use the looper to switch the sets on and off is this possible?

[elcid]

The best thing to do is to start multiple threads about the same topic, usually cutting and pasting what the first thread said. 50% of the time it works all the time.

[EvoGiant]

nice.

[lateralus819]

Originally Posted by elcid

The best thing to do is to start multiple threads about the same topic, usually cutting and pasting what the first thread said. 50% of the time it works all the time.

yeah there was a purpose to it, im sure not EVERYBODY reads every part of the forum, thats why i did it. Delete it if its such a problem.

[EvoGiant]

when i come on, i just hit "new Posts" and they ALL show up.

[shogun]

Originally Posted by elcid

The best thing to do is to start multiple threads about the same topic, usually cutting and pasting what the first thread said. 50% of the time it works all the time.

i lol'd

[shogun]

Originally Posted by lateralus819

so i got a problem, i ordered a loop switcher and im totally confused as to how to hook it up....heres how it runs...the return is connect to the output on my MXR 10 band EQ then that runs to my Boss DD-3 then the send runs into the input on the DD-3 thats the effects loop. the input on my amp runs down into my rocktron hush that runs into the out of my TS-9 that runs into the out of my SD-1 then the input of the SD-1 goes to my guitar...


The looper is a 2 loop pedal by loop master, it has a out, and an in on the sides and on the top is receive/send for loop 2 and the other side has receive/send for the loop 1, how do i hook all this up?i hooked it up fine with it all running to the input of the amp but it didnt sound the same so im clueless.

i wanna keep the dist/hush in front and the other 2 in the loop and use the looper to switch the sets on and off is this possible?

i think you may be thoroughly confused in how the signal of your guitar works.. seems as if you are explaining the patch in reverse.

your guitar should go into the input, the output should connect to your amp. for whatever you want in loop 1- connect the send to the input of your pedal, connect other pedals if you want them in, connect the output to the receive... do the same for loop 2 and you're set.. remember that you need to leave your pedals activated, and switch using the loop