OH MY GOD HELP

rya · #1 02-10-2007, 09:39 PM

UGH!!!!! I HAVE A LINE 6 PODXT, AND I DONWLOAD LINE 6 MONKEY, THEN WHEN I DOWNLOAD THE LASTEST DRIVERS, IT SAYS TO PLUG IT IN. I PLUG IN THE CABLE, TURN IT ON, AND IT JUST SAYS USB DEVICE NOT RECOGNIZED! SO I CANT GO THROUGH THE DRIVER PROCESS. I'VE TRYED THIS 8 TIMES AND COUNTING AND VERY VERY FRUSTRATED!!! >

WHEN I OPEN UP LINE 6 MONKEY IT STILL SAYS THE DRIVERS AREN'T INSTALLED!! PLEASE HELP!

**jaxadam** · #2 02-10-2007, 09:41 PM

SELL IT ON ****!

I'm just kidding, I have no idea of what to tell you to help you, but I'm sure there are plenty of people on here with pods that can help.

Good luck.

nightfiend14 · #3 02-10-2007, 09:48 PM

trying plugging it in before you start the computer. Sometimes that helps tons, some of my recording stuff, and my Vamp Pro won't work well with my computer unless I have them plugged in before starting the computer, then they work just fine.

wilch · #4 02-10-2007, 10:05 PM

Try the line6 forums.

toneboy · #5 02-10-2007, 10:23 PM

ASK YOUR MOMMY AND DADDY FOR HELP!!!

j.arledge · #6 02-10-2007, 10:54 PM

you have to go and actaully install the item on the computer , just like you would if you added a printer or something like that .

something should pop up and ask you about installing the softwear , hit yes and then go with auto-install .

if nothing pops up go to my computer and find the line 6 and then click on it and see if you dont get somthing then .

my guitar port pulled the same crap when i first got it

waylay00 · #7 02-10-2007, 11:22 PM

Quote:

Originally Posted by toneboy

ASK YOUR MOMMY AND DADDY FOR HELP!!!

LMAO

Be nice now

toneboy · #8 02-10-2007, 11:26 PM

Quote:

Originally Posted by waylay00

LMAO

Be nice now

I was, hence the smiley.

To be blunt, ift the post wasn't so exclamatory, I wouldn't have responded at all. I found it amusing I guess.

Clydefrog · #9 02-10-2007, 11:31 PM

Install the drivers by themselves. Once that is done, go into your hardware profile, select the PodXT (usually at that point, since it still doesn't have drivers attatched, it will have the yellow ! mark). Then double click it, select "Install Driver" or something to that effect, and point it to the direction of the Line6 install, where you will find a driver folder.

Tubarão Guitars · #10 02-11-2007, 01:12 AM

buy BOSS pedals.
and dont SCREEEEEAAAAAMMMMM!!!!

rlintz · #11 02-11-2007, 02:37 PM

+1 for checking out the POD forums at http://www.line6.com/support/forum.jspa?forumID=3. Lots of knowledgeable people there. Also, hit their support knowledgebase at http://line6.com/support/index.jspa and search / browse for your problem.

joeydego · #12 03-05-2007, 02:42 AM

re install the drivers and look on the site for updates.

TongueShredder · #13 03-05-2007, 03:15 AM

Quote:

Originally Posted by Tubarão Guitars

buy BOSS pedals.
and dont SCREEEEEAAAAAMMMMM!!!!

+2. Boss pedals are the way to go. I always feel the analog devices sound so much better than the digital ones...

prestigeaxes · #14 03-05-2007, 05:02 PM

alright download the drivers and then plug in the PODXT then it will say unrecognized then you need to select "find software from computer or something" let it search then it will say this may blah blah blah your computer,
click continue then it will set up a system reset point then after that it will work.

al. · #15 03-05-2007, 05:44 PM

calm down man

line 6 forums... they're helpfull enough... Line 6 monkey and line 6 edit.. sometimes u gota locate the drivers manually... dont wory about it