Setup problem

[al3x]

Hello,

First off all sorry for my bad english.

My gear is:

1) Ibanez Jem7vwh
2) Boss Gx700 effects processor
3) Marshall Valvestate vs100 amp

The problem is with the following setup:

guitar ----> gx700 input
gx700 output ---> amp input

I don't like gx700 distortion, so I use the amp distortion channel, but I can't use Delay, Reverb, Chorus, Etc... with the amp distortion it sounds really bad an buzzy.

I have tried a lot of loop combinations but they don't sound good, some of them make volume knobs of the amp doesn't work ( for example).

Anyone knows a good setup in order to use amp distortion and processor effects?

Thanks in advance.

Regards

[al3x]

The solution for this case has been the "4 cable method":

1) Cable from guitar to GX700 Input.
2) Cable from Gx700 effects out to Marshall in.
3) Cable from Marshall Send to GX700 effects in.
4) Cable from GX700 normal output to Marshall Return.

The only problem at this point is that gx700 Wah Wah doesn'work, any position, it doesnt work

Regards