!!! COIL TAP JEM !!! HELP!!

[mooro]

Hi, I need some help.

I have a jem 7vwh with evos and I am trying to convert it to having a coil tap / push pull as shown here ->
http://www.ibanez.com/support/wiring/2008/SV5470.pdf but...

I dont know what the colour coding is on the TRUE DUO BLAST pickups. A guy from dimarzio told me that the evo is ->
RED - Start North Coil
BLACK - Finish North Coil
GREEN - Start South Coil
WHITE - Finish South Coil

Does somebody know the TRUE DUO colour coding or is it obvious looking at this diagram?

Thanks for any help offered..... guitar is in bits, and I swore I woild change it before rebuilding otherwise i would never do it...

Peter

[jazzedout]

My guess is that the could be the same... Why don't you wire the guitar according to the diagram asnd see if it is correct. At least then you'll have a starting point if the wiring is not correct. I didn't know that the SV5470 had coil tap from the factory....

[albee1952]

white and black go together for standard humbucker so if you ground them out(either with a switch or an un-used tone pot), you get single coil. Red is hot and green goes to ground along with the shield for most normal switching. I have been doing lots of DiMarzio's lately so the color code is fresh in my mind. The DiMarzio website has wiring schematics anyway.