dimarzios to rg620x

[pths]

i have a little problem with my pickups. i bought couple of evolutions and don't know where to put those wires. i know that green and bare(?) goes to ground but what about black, red and white? i read dimarzio schematics couple of time, but don't just understand....

http://i12.photobucket.com/albums/a2...3012007168.jpg

[SonataGuitarist]

Well, without studying your pic, heres what I can tell you. With Dimarzios, white and black will always be soldered together, so that the humbucker operates in series (most common). Red is your hot connection, and green and bare, like you said, are grounded.

The red wire (hot) will go wherever the hot lead from the previous pickup went. The black and white, soldered together, can be wired to the pickup selector if you want coil splitting options (5 way switches, etc). If not, you can leave it alone. Solder green and bare onto the top of one of the pots.

Various wiring diagrams are available everywhere. The seymour duncan website has a ton, but the wire colors are different (color conversions are also easy to find).

Hope this helps, no doubt someone will pickup (accidental pun) where I left off.

Edit: 300th post!

[pths]

well, if somebody shows concretly where to put those wires(red, black and white).....
that should work like this:

[pths]

http://www.seymourduncan.com/support...way-w-spl.html

i put it like that, but black=red & red=black...nothing works except piezos..