Grounding Wire

[superhairycamel]

Ok so i have a cheap crapocastor that im doing up and i accidently pulled the grounding wire out i dont even know when, anyway i found it and i dont know where to solder it on, i dont know which pot. so heres the set up from looking from the back of the pickguard.

Volume pot

Tone Pot

Unput Jack (Yes its on the pickguard)


It has only the one humbucker.
So where do i connect the ground wire?

Ps all of the wiring apart from this is in place

[rty13ibz98]

on any pot...they are all connected(or should be). typically, the ground wire from the bridge goes to the volume pot. don't take that as law, as all of the grounds should be connect to a singular ground point.

rich

[buddroyce]

Look for a spot that other grounds are connected to and just solder it onto that.