Ibanez RG320dx

[hailhailhail]

Yeah i need help with a rewiring of this guitar... Ive tried for a couple of days and i cant get it done.. So if anyone can show me a picture or something of that sort it would help a lot.. Thanks

[TTech]

http://www.ibanez.com/wiring/models.asp?t=e

[hailhailhail]

yeah the DX isnt there... and i have 2 humbuckers, and a 5 way switch pick up...

[isida.d]

yeah, broken link

[TTech]

The RGT42fm is a 2 humbucker setup also.

[lyconxero]

http://www.ibanez.com/wiring/wire.asp?y=2004&w=RGT42

[JM5150]

When you get it figured out, let me know what the "blue" wire is, with respect to Dimarzios (which don't have blue wires).....

[hailhailhail]

yeah my ibanez only has Red, White, and black.. theres no blue in there.. i really dont know what kind of pick-ups are on it.. Still the stock ones... Sorry for being a noob at this..

[RJP1]

So has anyone figured out how to wire the RG320DX? I'm in the same postion as the original poster "HailHailHail" and need to know how to rewire this body i bought off ****.
As mentioned above, the Ibanez site's wiring diagram doesn't work for this model.

Can anyone help us?

Cheers, RJP1

[lyconxero]

If you're wiring it up with Ibanez pickups, then you should be able to follow one of Ibanez' diagrams but if you're going with Dimarzios or Duncans then you'll want to contact them about how to wire it on that switch.

[rty13ibz98]

wire it like the sc420...or with dimarzio's, the rg3120 with the sc switch. the only difference with the sc420 vs. the rg3120 schematic is one wire jumper on the switch to make the neck pickup either single coil or parallel. any questions, feel free to post.



rich

[RJP1]

Hey the thing is my RG320dx has 2 humbuckers:
Both have 3 wires (one of which is braided, earth wire)

The neck Hum wire = red
The bridge Hum wire = green
(the outer sheath color)

1 volume pot
1 tone pot

and a 5-way (8 terminal) switch.

So the diagram for the SC420 is close, but the neck pickup has 5 wires (one of which is a braide)

So is there a way of using my 3 wire humbucker in place of the SC420's 5 wire one?

I'm good at electronics, just never done a guitar.... Cheers