INF 1 pickup wiring

[aloymetal]

from here:
http://www.ibanez.com/wiring/wire.asp?y=2004&w=RGT42

can anybody tell me which wire is hot output?
i'm confuse within blue, black & white wire, which one is hot output and which is split wire.

i wanna put this PU in LTD guitar that have 3-way selector switch.
please... somebody.

[phantoms]

I believe that Red and Black are one coil, and Blue and White are the other. If you wanted to, you could join the Black and White wires together and use them as a split (coil tap). Then you can use Blue as Hot and Red to ground. You could reverse those wires if you prefer, but that's how it is in the diagram.

[madpickin03]

The hot output is the ones that's going to the back of the volume pot, while the split is goin to the pickup selector.

Basically if you wanna wire it HSH, you just need 3 wires (1 to back of the volume pot, 2 to the selector), Ibanez had used 4 for INFs,PSNDs and STDs. Still, the 2 hot needs to be soldered together.

[aloymetal]

thank you guys.
the blue one is the hot output on INF1.
my LTD is just HH pu guitar.
mission completed.