Is this RG550 HSH wiring possible? (Fairly sophisicated)

[invertedlefthandtremolo]

Hey ya'll,

So I've got a 20th 550 DY here that I want to rewire (It's #667, or as we call it, the neighbour of the beast), but I want to do a difficult wiring that I'm not even sure is possible, so I'm hoping someone can shoot me a diagram or two on how to do this.

It's currently got Crunch Lab/LiquiFire with either an Air Norton S or the stock in the middle, haven't decided yet. Keep in mind that I also wire my pickup selector backwards (the usual bridge position selects my neck, and vice versa). Finally, it doesn't seem to be routed deep enough for push pulls or large pickup selector switches, but I understand that I'll probably need to get some type of megaswitch.

Here's what I'm hoping for if I go with the Air Norton:

Bridge normal - Air Norton Tapped - Air Norton Full - Bridge and neck inner coils (Like Petrucci) - Neck normal. 1 Volume, no tone, kill switch.

And with the stock:

Bridge normal - Bridge/middle - middle - Bridge and neck inner coils - Neck normal. 1 Volume, no tone, kill switch.

I'm also wondering which way to turn the Crunch Lab to pull this off. I currently have the bar towards the bridge, but I'm thinking it's probably better to turn it around like Petrucci.

Thanks so much for your help. Jemsite is always awesome!

Craig.

[zepsongs]

See if anything here might interest you:

http://www.guitarelectronics.com/c=D...ckup_diagrams/