My switch finally bit the dust.

[TheToneZone]

So the switch in my RG3120 finally took a dump and rather than spend months for an order from Ibanez get through to my local shop I've been considering one of the Megaswitches from StewMac. I know neither the E or P is a direct replacement for the stock 3PS1VLX91 but I was wondering if anyone knew off the top of their head whether I could wire one up to get at least the bridge, neck, and both bridge and neck humbuckers simultaneously working in full humbucking mode. I'm not so hot on the single coil modes so that's a minor issue, though I wouldn't mind having the neck or bridge single only working as well.

Mike

[reguv760]

Check into a Megaswitch E+...
or grab a VLX91 from Rich

Reg

[TheToneZone]

I browsed rich's selection, he didn't have any switches that i could find.

I'm gonna give the P switch a shot and see if it can do what I need it to. Megaswitches are better switches and easier to wire than the Ibz' anyway.