Need Help Figuring Starts/Finishes for Ibanez PUs

[CrossingStar]

I drew out the attached diagram of an Ibanez 2 hum with 5-way (COR-TEK) is wired up. Judging from where they go, what do you think are the Starts and Finishes?

[AlaskaBat]

Same as the DiMarzios, but substitute green for blue in the Diagrams you find.
The black and white should be the same.

Look at the charts in the first post here:
http://www.jemsite.com/forums/f35/an...ad-110579.html

[CrossingStar]

You know, that's what I was thinking too but I had notes from a previous project with Ibanez PUs where I'd written that the Black & White were Starts, and I'm trying to duplicate this wiring with DiMarzios & the CORTEK switch. That thinking would have me putting the Green and Red DiMarzio wires to the same lug from the bridge PU and I know that isn't right.

[AlaskaBat]

Originally Posted by CrossingStar

You know, that's what I was thinking too but I had notes from a previous project with Ibanez PUs where I'd written that the Black & White were Starts, and I'm trying to duplicate this wiring with DiMarzios & the CORTEK switch. That thinking would have me putting the Green and Red DiMarzio wires to the same lug from the bridge PU and I know that isn't right.

It does get screwy--just follow that chart.