I'm trying to replace PU of my RG350DX
I desoldered the old INF Series, take care of draw down the diagram.
Reading the instruction I know that Red
is the hot
is the ground
, Black/White wires together
and soldered to nowhere.
- Super Distortion
goes in 6th contact of the 5-way switch.
goes in 1st contact
goes in 8th contact of the 5-way switch.
goes in 3rd contact
goes in 2nd contact of the 5-way switch.
With amp on I can see that the only positions that works well are the 1st (only Bridge PU) and the 5th (only Neck PU), so the 2 - 3(only Middle) - 4 are dead.
Where I've wrong with the solder?
Do you have any suggestions to help me.
Thousand thanks guys.