Rg570 pickup wiring (V7 and V8 pickups)

[rg570exwithseymourduncans]

Hello, I have just replaced all the electrics (No, really) in my Ibanez Rg570ex. I have put in two seymour duncan distortion pickups with coil taps, a seymour duncan JB junior where the S1 used to be, an ernie ball 3 way selector, an exra volume control and an awful lot of wiring. My question is (for anyone who has got this far without falling asleep) I want to use the V7 and V8 pickups in my epiphone sg as it has push pull coil tap switches (for anyone who hasnt already guessed I am a serial guitar customizer!!). However I have no wiring diagrams for the pickups so I dopnt know what goes where. Anyone any ideas? I know the SD pickups are:
Green: earth
Red+white connected together (join one coil to the other
Black: Output

Are the Ibanez pickups similar and how would you wire them with a coil tap??

Ta.

[Murray]

i dont know much bout pickups myself but this is how an RG570 is wired with V7/V8/S1

http://www.ibanez.com/wiring/wire.asp?y=2002&w=RG570

[ScottB]

Red is hot and white is the coil split.

[rg570exwithseymourduncans]

Ace!! Thanks Very much.