Which EMGs for use in basswood?

[vroom]

I have an RG570 and am considering a set of EMGs. Because it is basswood, I've heard people saying the 81 is too thin for the neck. In its place, some people recommend an 85, and a 60 for the neck. I think I'd put an SA in the middle, also.

Does anyone agree that the 85/60 set is best for basswood? Any differing opinions?

[erikm5150]

85 in the bridge! -- i've tried this before and it's a good match -- it'll fatten and warm up the bridge tone. but still with nice bite and cut...
81 in the bridge of an RG sounds thin IMHO. -- I've already tried that too.

so yeah, you're right on -- 85/60 combo with SA in the middle should get you great tones

[LonePhantom]

I've played an 85 and an 81 both in the bridge position on my basswood RG and loved both of them. I'm currently playing with the 81 and I think I'll keep it that way. 85 in the neck sounds great too.

[Moibanez]

I have an Rg570 with the 81 bridge 85 neck, I think it sounds awesome.

[vroom]

What kind of amps are you guys using with the 81 in the bridge? I've got a 5150 that it'd be going through, which can sometimes be icepicky.

[jaxadam]

81 or 85 in the bridge will be fine. I would check out a 60, or even better, a 60A in the neck.

SA for single coil is a good choice, too.

81/SA/60A. Can't go wrong.

[C.Thep]

I would not recommend any EMG's in basswood. But that is just my opinion

[Moibanez]

Originally Posted by vroom

What kind of amps are you guys using with the 81 in the bridge? I've got a 5150 that it'd be going through, which can sometimes be icepicky.

Mesa Boogie Roadster

[jaxadam]

P.S. Do an 18 volt mod. Makes a big difference.