Wires and a mega switch

[jmsjabb]

You guys seem in the know, so here goes..
I have a Patrick Eggle Vienna with two Kent Armstrong Humbuckers.

I have a E mega switch, a push / pull pot, a volume pot and a couple of caps.
Has anyone got a wiring plan for this set up, baring in mind I can solder well but am a layman in terms of the actual wiring.

[reguv760]

What's the plan with the push/pull pot? coil-tapping, phase inverse, series/parallel?

I have an E Megaswitch as well as a push/pull pot in my 760 for coil-tapping. For both to work, simply wire the coil-tap wires of each pickup (b + w in DiMarzio) to a middle lug of the push-pull pot and ground the bottom lugs [looking into the cavity] while connecting the hot wire to the switch.

Reg

[jmsjabb]

The idea is to coil tap.