Wiring problem for 2 humbuckers

[EvanzRG]

ive followed the schematic for rg7620 for wire for 2 humbuckers

apparantly after ive soldered the wires, there is noise and the 4th position is not working

im using air norton neck and evolution bridge
ive checked the soldering and i think there shouldnt be any problems

ive tried to test the pickups if they work by connecting the guitar to the amp without the strings on

there were noise when im not touching the guitar, could it be because ive removed the single coil pick up thats why noise is induced by the surrounding?
ive switched off my tv lights etc, but theres still noise


could anyone please post a schematic that i could use to wire it in 2 humbuckers with parrallel and split tones

right now i think
after ive wired, its a 8pole ibanez switch stock
should i get the 24 pole version and rewire it again?

it goes like

1 neck bridge
2 neck
3 neck bridge
4 off
5 bridge/ neck

seems weired even tho ive followed the wiring
and the orientation of the wiring seems right to me but im not sure

is there anyway to test it?

thanks in advance guys!

[horstausmforst]

The 8-pole switches in HSH guitars (for ex. RG550) are different to those in HH guitars (7620); although they look identical.
Your best option for a HH config would be either a 3-way switch (with a seperate coil tap if you want.. look at the JS1000 diagram) or indeed a 24-pole switch (some HH saber diagrams should help you there).

[EvanzRG]

no wonder
i rewired it in another orientation
seems like it doesnt really work that way


guess ill have to buy a switch

seems like its wired in
split, ,parrallel ,split ,split ,neck n bridge
position 2 is barely audioble tho