Ibanez JEM Forum banner

JS1 ('90/'91) Volume Pot Wiring / Wiring Model?

2K views 0 replies 1 participant last post by  guitarboy 
#1 ·
Hi,

I have recently acquired a JS1, 2 pickup model with skunk stripe in the neck, so I guess its a 90-91 model.

Have a problem with the volume pot as it doesnt reduce the volume much...i.e. at "zero" on the knob it has only reduced the guitar volume by approx 30% and obviously it can still be heard through the amp.

I can't find a wiring diagram for the JS1 anywhere. The earliest JS1000 wiring model is from '94 and there appear to be differences (E.G. I have a 471k resistor on the vol pot wired into the middle lug!) Looks like some of the connections on my pot have been resoldered so I dont know how standard it is...

Can anyone help me with a wiring diagram or comparison with their own JS1?

By the way, this JS1 smokes my JS1000 for sound and playability!!!!

Thanks
Kirbs
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top