Jemsite - View Single Post - Can you help me complete my diagram? (Push Pull volume pot Coil tap HH)
View Single Post
post #15 of (permalink) Old 09-21-2016, 02:36 PM Thread Starter
ErickMoral
 
Join Date: May 2013
Location: Florida
Posts: 55
Re: Can you help me complete my diagram? (Push Pull volume pot Coil tap HH)

Quote:
Originally Posted by sebastian View Post
If your jack worked before, it's probable okay.
Thank you good sir, it was working perfectly with the 3 way switch, so Iīm pretty sure itīs fine.

Came across more interesting information on the internet, please take a look at this diagram;



Whatīs interesting about it is that, if you take a close look at the jack (which by the way has three legs, two large ones and a short one) the cable that goes to the middle pin of the volume pot is coming from the short leg of the jack! But on my diagram itīs coming from one of the large ones and the short one is not used... Should I try this too? What would be the difference? Why does the jack have three legs?

Thank you for your help!
ErickMoral is offline  
 
 
For the best viewing experience please update your browser to Google Chrome