Jemsite - View Single Post - Cracked wizard 2, repair recommendations
View Single Post
post #2 of (permalink) Old 02-15-2019, 08:37 PM
sepulchrave
 
Join Date: Apr 2018
Posts: 547
You need to remove it and strip it off the hardware and undo the truss rod then set it on a couple of wooden blocks on a table and gently apply a clamp to the centre of the fretboard bowing the neck to open up the cracks enough to inject wood glue using a syringe to fill them all up, then release the clamp and flip it over before lightly clamping again to keep the cracks closed while you wipe up the excess glue and leave it for 24hrs.
sepulchrave is offline  
 
 
For the best viewing experience please update your browser to Google Chrome