Jemsite - View Single Post - Ibanez RG1527 bridge setup help
View Single Post
post #1 of (permalink) Old 07-21-2019, 08:47 AM Thread Starter
Jamieslaysuk
 
Join Date: Jul 2019
Posts: 1
Ibanez RG1527 bridge setup help

Hey guys. I’m new here! Nice to meet you all. I have an RG1527 that has an edge pro bridge. I recently got some heavy duty springs for it as I have it set in drop a tuning. I recently noticed that when diving the bar sharp it would hit the wood. Turns out my brass block was loose and I needed to tighten the screws. I spent a while doing that today and restringing it and setting it up. To keep the bridge level I have to have the springs quite close to the body in the back and that is putting a lot of slack on the springs therefor it looks like again the brass block has moved and when diving sharp I still hear the bridge touching the wood. Any advice? Go back to thin springs? Use more springs. Please help!
Jamieslaysuk is offline  
 
 
For the best viewing experience please update your browser to Google Chrome