Jemsite - View Single Post - Schaller-S type switch vs YM-50 wiring, help please
View Single Post
post #1 of (permalink) Old 10-10-2020, 01:22 PM Thread Starter
Ivan75
 
Join Date: Nov 2013
Location: Belgrade, Serbia
Posts: 19
Schaller-S type switch vs YM-50 wiring, help please

The RG in question is HSH, Evos and a True Velvet in the middle.
My YM50 5-way switch is gone, I wanted a CRL but I couldn't find one ina short notice.
So I wired a Schaller Megaswitch type ''S''

The wiring was standard RG with an additional neck (or bridge) pup splitting using the Push/pull switch when the lever is on neck or bridge. Everything else was standard and it worked fine.
Now, on wiring it all according to Schaller website instructions, I ended up with both humbuckers in split mode whatever you do with the push/pull.
What I'm doing now is cross-referencing the switches to find the wrong connections, for now, I think I should just forget the Schaller instructions, (no additional split coils mentioned there), and just wire it the way the YM50 was wired?
So basically the question is are the switches (Schaller and YM50) mapped the same way? If so, I can disregard the website wiring template.
Any thoughts?
I posted an image of the diagram that actually worked.
I actually just did it according to the diagram, it does not work at all, I hope I just turned the switch backwards while soldering so reversing it would solve the problem. If not, I really don't know what to do.
Attached Images
File Type: png Screenshot (17).png (171.0 KB, 10 views)

Last edited by Ivan75; 10-10-2020 at 03:46 PM.
Ivan75 is offline  
 
 
For the best viewing experience please update your browser to Google Chrome