Join Date: Jan 2005
Location: Canberra, Australia
Re: RG350MYE neck/bridge fit question
Yeah, well what is seriously the problem with the neck? If you no issues with the neck, other than "it's not a Japanese made neck" then why replace it. As others said, you won't find another matching DY headstock neck. Get the frets finished nicely, should be right to go.
With regards to the bridge, again if you have no other issue than "it's not a Japanese made bridge" just leave it. If you don't like it at all then you can usually retro fit an Edge Pro with minimal work. If you are happy to have a new bridge put in with a little work, go buy yourself a Gotoh licenced Floyd Rose and route out the trem cavity to fit, and replace the Edge III studs with the locking Gotoh ones.